SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Connection..... F port Node Name......... 20060B00001CE5F8
Port Id........ 65792 Port Name......... 50060B00001CE5F8
SAC State...... Ready SAC Subtype....... 1
Configured Devices ( group: 11, module: 2 ):
Slot Name State Substate Primary Backup
PID PID
1 $PT00-B STARTED 2,272 3,264
1 $PT01-B STARTED 3,283 2,273
1 $PT02-B STARTED 3,282 2,274
SAC \IO.$ZZSTO.#FCSA.SAC-2.GRP-11.MOD-2.SLOT-1:
SAC Number..... 2 Firmware.......... T0630G06
POST Result.... PASSED SAC SCSI ID.......
SAC Type....... FC Side.............. Both
Status......... PRESENT
Connection..... Loop Node Name......... 20060B00001CE5FA
Port Id........ 1 Port Name......... 50060B00001CE5FA
SAC State...... Ready SAC Subtype....... 1
Configured Devices ( group: 11, module: 2 ):
Slot Name State Substate Primary Backup
PID PID
1 $PT00-M *STARTED 2,272 3,264
1 $PT01-M *STARTED 3,283 2,273
1 $PT02-M *STARTED 3,282 2,274
Explanation of Fields — Detailed STATUS FCSA ADAPTER Report
The name of the flash boot file.Flash Boot
The name of the flash firmware fileFirmware
Indicates the status of the flash update operationFlash Update Active
Indicates the state resulting from the flash update operationFlash Update Result
ServerNet Addressable Controllers:
Indicates the Fibre Channel connections type.Connection
The controller identifier from the Fabric Switch Name Server. (For the Loop connection type,
Port Id is equal to controller AL_PA.)
Port Id
indicates the state of the SAC:SAC State
Initial state, not downloadedINIT
Downloaded, ready to accept commandsREADY
No hardware, SAC not installedNO-HW
DownloadingDOWNLOADING
SAC firmware errorFW_RR
SAC hardware errorHW_ERR
Downloads exceed limitMAX_DOWNLOAD
The worldwide name (WWN) of the controller node.Node Name
Displaying Storage Adapter Information 165