SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

“Open SCSI Path Attributes” (page 171) lists the possible attribute values for the different types of
Open SCSI connections.
Table 10 Open SCSI Path Attributes
FCSA ConnectionPMF/IOMF ConnectionSNDA (S-pic) Connection
Integrity NonStop NS-series
LOCATION
110-1251-891-89Group
2-3 (IOAM)11Module
1-5 (FCSA)50 or 5551-54Slot
1-231-4SAC
NA0-15 (except 6-7)0-15 (except 6-7)SCSIID
64-bit WWNNANAPORTNAME
0-327670-70-7LUN
LOCATION represents PRIMARYLOCATION and BACKUPLOCATION.
SAC represents PRIMARYSAC and BACKUPSAC.
PORTNAME represents PRIMARYPORTNAME and BACKUPPORTNAME.
Displaying Information About an Open SCSI Device
Displaying Configuration Information
The “INFO SCSI Command” (page 259) displays configured information about an Open SCSI
device.
Example of an INFO SCSI Report
-> INFO SCSI $S11500
STORAGE - Info SCSI configuration \COMM.$S11500
Primary Backup *SCSI ID / Port *LUN *Program
Location Location
(11,1,50) 0 0 $SYSTEM.SYSTEM.TDSCSI
Explanation of Fields — INFO SCSI Report
Indicates an attribute whose value you can change by using an ALTER SCSI command.*
The primary and backup physical locations of the adapter where the device is attachedPrimary Location Backup
Location
For Open SCSI devices, the SCSI ID that the IOP uses to access the device.SCSI ID / Port
For Open SCSI Fibre Channel devices, the worldwide name (WWN) that the IOP
uses to access the device.
The logical unit number (LUN) of the device used by the IOP to select any additional
devices that are attached to the device.
LUN
The object file name of the IOP.Program
Examples of Detailed INFO SCSI Reports
This example shows an INFO DETAIL report for an Open SCSI device connected to an IOMF CRU:
-> INFO SCSI $S11500, DETAIL
STORAGE - Detailed Info SCSI configuration \COMM.$S11500
Displaying Information About an Open SCSI Device 171