SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

I/O Process Information:
*BackupCpu............................. 0
*HighPin............................... ON
*PrimaryCpu............................ 1
*Program............................... $SYSTEM.SYSTEM.TDSCSI
*RecSize............................... 57344
*StartState............................ STARTED
SCSI Device Settings:
*MaxOpens.............................. 4
*NumIO................................. 8
*StructAreaSize........................ 24
*TraceBufLen........................... 33
*TraceLevel............................ 65535
Primary Path Info:
Adapter Name.......................... $ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-50
Adapter Location (group,module,slot).. (11,1,50)
*LUN................................... 0
SAC Name.............................. IOMF.SAC-3.GRP-11.MOD-1.SLOT-50
SAC Number............................ 3
*SCSI ID / Portname.................... 0
This example shows an INFO DETAIL report for an Open SCSI Fibre Channel device connected
to an FCSA on an Integrity NonStop NS-series server:
-> INFO SCSI $EXT8, DETAIL
STORAGE - Detailed Info SCSI configuration \NSCOMM.$EXT8
I/O Process Information:
*BackupCpu............................. 1
*HighPin............................... ON
*PrimaryCpu............................ 1
*Program............................... $SYSTEM.SYSTEM.TDSCSI
*RecSize............................... 57344
*StartState............................ STARTED
SCSI Device Settings:
*MaxOpens.............................. 4
*NumIO................................. 8
*StructAreaSize........................ 24
*TraceBufLen........................... 33
*TraceLevel............................ 65535
Primary Path Info:
Adapter Name.......................... $ZZSTO.#FCSA.GRP-111.MOD-2.SLOT-5
Adapter Location (group,module,slot).. (111,2,5)
*LUN................................... 0
SAC Name.............................. FCSA.SAC-1.GRP-111.MOD-2.SLOT-5
SAC Number............................ 1
*SCSI ID / Portname.................... 2000003E00452211
Explanation of Fields
I/O Process Information:
Indicates an attribute whose value you can change by using an ALTER SCSI command.*
The processor number of the backup IOP.BackupCpu
Shows whether the IOP can run at a high PIN (ON) or a low PIN (OFF). The PIN is the process
identification number.
HighPin
The processor number of the primary IOP.PrimaryCpu
The object file name of the IOP.Program
172 Configuring and Managing Open SCSI Devices