SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

For cartridge tape drives, shows whether compression is configured. This setting is ignored
by 5194 tape drives because compression is always on. For other tape drives, this field is
not applicable (N/A).
Compression
The physical location (group, module, and slot) of the adapter where the tape drive is
attached.)
Adapter Location
For SCSI devices, the device ID that is configured for the device. This ID must match the SCSI
ID that is physically set in the device. Normally, tape device IDs are either 4 or 5.
DeviceID/PortName
For Fibre Channel devices, the worldwide port name (WWPN) that is configured for the path
to the device. The number is a 16 character hexadecimal number, without a leading %H.
Examples of INFO TAPE Detailed Reports
This example shows an INFO DETAIL report for a tape drive connected to a PMF CRU:
-> INFO TAPE $DLT23, DETAIL
STORAGE - Detailed Info TAPE configuration \COMM.$DLT23
Adapter Name.......................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
*Adapter Location (Group,Module,Slot).. (1,1,55)
*BackupCpu............................. 0
*Compression........................... ON
*Density............................... 6250
*DeviceID/PortName..................... 5
*HighPin............................... ON
*LUN................................... 0
*MaxOpens.............................. 4
*PrimaryCpu............................ 1
*Program............................... $SYSTEM.SYSTEM.OTPPROCP
*RecSize............................... 57344
*SAC Name.............................. $ZZSTO.#PMF.SAC-3.GRP-1.MOD-1.SLOT-55
*StartState............................ STARTED
This example shows an INFO DETAIL report for a tape drive connected directly to an FCSA on an
Integrity NonStop NS-series server:
-> INFO TAPE $LTO3, DETAIL
STORAGE - Detailed Info TAPE configuration \OSMQA3.$LTO3
Adapter Name.......................... $ZZSTO.#FCSA.GRP-110.MOD-3.SLOT-4
*Adapter Location (Group,Module,Slot).. (110,3,4)
*BackupCpu............................. 1
*Compression........................... ON
*Density............................... 6250
*DeviceID/PortName..................... 210000E08B1755DC
*HighPin............................... ON
*LUN................................... 0
*MaxOpens.............................. 4
*PrimaryCpu............................ 0
*Program............................... $SYSTEM.SYSTEM.OTPPROCP
*RecSize............................... 57344
*SAC Name.............................. $ZZSTO.#FCSA.SAC-2.GRP-110.MOD-3.SLOT-4
*StartState............................ STARTED
Explanation of Fields — INFO TAPE Report
Indicates an attribute whose value you can change by using an ALTER TAPE command.*
The name of the adapter where the tape drive is attached.AdapterName
The physical location of the adapter where the tape drive is attached.Adapter Location
(Group, Module, Slot)
The processor number of the backup tape process.BackupCpu
For cartridge tape drives, shows whether compression is configured. This setting is ignored
by a 5194 tape drive because compression is always on. For other tape drives, this field is
not applicable (N/A).
Compression
Displaying Information 181