SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

The ESS administrator must give you the WWN so that you can specify it in this attribute.
Enter number as a 16 character hexadecimal number, without a leading %H.
MBACKUPSAC { number | name }
(mirrored 45xx and mirrored M8xxx disks only) is the SAC that controls the mirror backup
path to the disk
NOTE: This attribute is not valid for the PROFILE object.
Is the SAC subdevice number on the adapter. If you specify MBACKUPSAC in number format, you
must also specify MBACKUPLOCATION.
number
Is the full name of the SAC location. For
example:SNDA.SAC-1.GRP-1.MOD-1.SLOT-53FCSA.SAC-1.GRP-11.MOD-2.SLOT-5
name
MIRRORCLIM clim-name
is the name of the CLIM that controls the mirrored path to the disk.
NOTE: This attribute is not valid for the PROFILE object.
MIRRORDEVICEID { number | ( shelf,bay ) }
(mirrored 45xx and mirrored M8xxx disks only) is the device ID of the disk accessed on the
mirror path to the disk
NOTE: This attribute is not valid for the PROFILE object.
For 45xx disks:
Is the unit number of the disk. number is in the range 1 through 7.number
For M8xxx disks in an FCDM:
Is the FCDM’s shelf number. shelf is in the range 1 through 4.shelf
Is the number of the disk. bay is in the range 1 through 14.bay
If you configure a disk volume for use with an FCSA connected to an ESS, you cannot specify
MIRRORDEVICEID.
MIRRORPARTITION mirror-part-num
specifies the partition number for the mirror half of a disk volume. If this attribute is not specified,
the mirror disk is not a partitioned disk.
MIRRORING { OFF | ON }
specifies whether a disk should be automatically configured to be half of a mirrored disk
NOTE: This attribute is only valid for the PROFILE object.
Enables automatic configuration as half of a mirrored disk. A disk in an odd-numbered slot is assigned the
next-higher slot number for its mirror; a disk in an even-numbered slot is assigned the next-lower slot number
for its mirror. (Default)
ON
Disables automatic mirroring.OFF
MIRRORLOCATION ( group, module, slot )
for internal disks, is the location of the mirror half of the disk volume
NOTE: This attribute is not valid for the PROFILE object.
ADD Command 207