SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

• LUN attributes:
MIRRORLUN◦
◦ PRIMARYLUN
• CLIM attributes:
BACKUPCLIM◦
◦ MBACKUPCLIM
◦ MIRRORCLIM
◦ PRIMARYCLIM
These virtual disk attributes are not copied from the LIKE object. To assign values to these
attributes, you must explicitly specify them:
• ANTLOCATION
• PENDOPSLOCATION
• POOL
attribute-spec
is one or more “Disk Attributes for the ALTER DISK Command” (page 230) or “Virtual Disk
Attributes for the ALTER COMMAND” (page 231).
Disk Attributes for the ALTER DISK Command
These attributes are valid for the ALTER DISK command. For a description of these attributes, see
“Attribute Descriptions for Disk Commands” (page 198)
[ , ALTNAME $vol ]
[ , AUDITTRAILBUFFER number ]
[ , AUTOREVIVE { ON | OFF } ]
[ , AUTOSELECT { ON | OFF } ]
[ , AUTOSTART { ON | OFF } ]
[ , BACKUPCPU number ]
[ , BACKUPCLIM clim-name ]
[ , BACKUPDEVICEID { number | ( shelf,bay ) } ]
[ , BACKUPLOCATION {group,module,slot) ]
[ , BACKUPPORTNAME number ]
[ , BACKUPSAC { number | name } ]
[ , CACHE ( block-size, num-blocks ) |
( ( block-size, num-blocks ),
( block-size, num-blocks ),... )]
[ , CAPACITYMISMATCH { ON | OFF } ]
[ , CBPOOLLEN number ]
[ , CLEARENCRYPTKEY
[ , ENCRYPTRATE rate
[ , ENCRYPTPRIORITY priority
[ , FASTBULKWRITE { ON | OFF } ]
[ , FORCED ]
[ , FSTCACHING { ON | OFF | ENABLED} ]
[ , FULLCHECKPOINTS { ENABLED | DISABLED | FORCED } ]
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , IGNOREINCONSISTENCY ]
[ , KEYALGORITHM {XTS-AES | CBC-AES }
[ , KEYSIZE 256
[ , LABEL $vol ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
230 Storage Subsystem Commands