SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

[ , MAXLOCKSPERTCB number ]
[ , MBACKUPCLIM clim-name ]
[ , MBACKUPDEVICEID { number | ( shelf, bay ) } ]
[ , MBACKUPLOCATION {group,module,slot) ]
[ , MBACKUPPORTNAME number ]
[ , MBACKUPSAC { number | name } ]
[ , MIRRORCLIM clim-name ]
[ , MIRRORDEVICEID { number | ( shelf,bay ) } ]
[ , MIRRORLOCATION ( group,module,slot ) ]
[ , MIRRORPARTITION mirror-part-num ]
[ , MIRRORLUN number ]
[ , MIRRORPORTNAME number ]
[ , MIRRORSAC { number | name } ]
[ , NEWENCRYPTKEY
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NOSTART ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PRIMARYCLIM clim-name ]
[ , PRIMARYCPU number ]
[ , PRIMARYDEVICEID { number | ( shelf,bay ) } ]
[ , PRIMARYLOCATION ( group,module,slot )
[ , PRIMARYPARTITION primary-part-num ]
[ , PRIMARYLUN number ]
[ , PRIMARYPORTNAME number ]
[ , PRIMARYSAC { number | name } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , RECOVERYTIMEOUT number ]
[ , REVIVEBLOCKS number ]
[ , REVIVEINTERVAL number ]
[ , REVIVEPRIORITY number ]
[ , REVIVERATE number ]
[ , SENDTO STORAGE ]
[ , SERIALWRITES { ENABLED | DISABLED } ]
[ , SQLMXBUFFER number ]
[ , STARTSTATE { STARTED | STOPPED } ]
[ , SWAPMIRROR ]
[ , VOLNAME $vol ]
[ , WRITECACHE { DISABLED | ENABLED } ]
[ , WRITEVERIFY { ON | OFF } ]
Virtual Disk Attributes for the ALTER COMMAND
These virtual disk attributes are valid for the ALTER DISK command. For a description of these
attributes, see “Attribute Descriptions for Disk Commands” (page 198)
[ , ANTCAPACITY number ]
[ , BACKUPCPU number ]
[ , CACHESIZE number ]
[ , HIGHPIN { ON | OFF } ]
[ , MODE { NOISY | QUIET } ]
[ , PRIMARYCPU number ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , STARTSTATE { STARTED | STOPPED } ]
ALTER DISK Examples for Physical Disks
See the procedure for “Altering Disk Attribute Values” (page 84).
• To change the alternate volume name of a disk from $DATA00 to $SPARE99:
ALTER Command 231