SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

OUT file-spec
directs all SCF output to the specified file.
CLIM $ZZSTO.clim-name
is the name of the CLIM.
DETAIL
returns a list of the storage devices configured to use the CLIM, including the LUN and partition
number for each path. The DETAIL option is required.
INFO CLIM Considerations
Additional information for a CLIM is available from $ZZCIP.
For more information, see the Cluster I/O Protocols (CIP) Configuration and Management Manual
INFO CLIM Examples
• To display a summary of information for all known CLIMs on a system:
-> INFO CLIM $ZZSTO.*, DETAIL
• To show the detailed configuration of S1002533:
-> INFO CLIM $ZZSTO.S1002533, DETAIL
• This command displays detailed information on all CLIMs in a system:
-> INFO CLIM $ZZSTO.S1002533,DETAIL
STORAGE - Detailed Info CLIM \NBSTS01.$ZZSTO.#S1002533
Configured Devices:
Type Name Primary CPU Backup CPU Lun Partition
DISK $SSD1-P 0 1 101 1
DISK $SSD2-B 2 3 101 2
DISK $SSD3-P 1 3 101 3
DISK $SSD4-P 1 3 202
DISK $SAS1-P 2 3 208
DISK $SAS2-B 0 1 102
INFO DISK Command
The INFO DISK command displays configuration information about a physical or virtual disk. The
syntax is:
INFO [ / OUT file-spec / ] DISK $disk
[ , { BAD | CACHE | CONFIG | DETAIL | LABEL | LOG |
OBEYFORM | SECTOR [ % | %H ] lsa } ]
[ , POOL $pool ] [ , SEL state ]
[ , SUB { ALL | MAGNETIC | VIRTUAL } ]
Wild-card characters are supported.
BAD
(physical disks only) displays information about any bad sectors.
CACHE
(physical disks only) displays current cache information.
CONFIG
(physical disks only) displays current configuration information, including the LUN and partition
number (if it exists) for each CLIM disk path.
DETAIL
displays detailed configuration information, including the LUN and partition number (if it exists)
for each CLIM disk path.
254 Storage Subsystem Commands