SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

See the display and explanation under “Displaying Profile Attributes” (page 54).
INFO MON Command
The INFO MON command displays configuration information about the SMF master process. The
syntax is:
INFO [ / OUT file-spec / ] MON $ZSMS
[ , { DETAIL | OBEYFORM } ] [ , SEL state ]
Wild-card characters are supported.
MON $ZSMS
is the SMF master process.
DETAIL
displays detailed configuration information.
OBEYFORM
displays information about the object in the format used in an ADD command.
SEL state
specifies that the command affects only devices in the specified state.
INFO MON Examples
• To display information about the SMF master process:
-> INFO $ZSMS
See the display and explanation under “Example of an INFO MON Report” (page 42).
• To display detailed information about the SMF master process:
-> INFO $ZSMS , DETAIL
See the display and explanation under “Example of a Detailed INFO MON Report” (page 43).
INFO PARTITION Command
The INFO PARTITION command displays the physical disk partition information for the specified
CLIM and LUN. The syntax is:
INFO PARTITION $ZZSTO, PRIMARYCLIM clim-name,
PRIMARYLUN lun ,
BACKUPCLIM backup-clim-name
[, BACKUPLUN backup-lun]
[, OBEYFORM ]
Wild-card characters are not supported.
PRIMARYCLIM clim-name
is the name of the one CLIM that is connected to the disk.
PRIMARYLUN lun
specifies the logical unit number (LUN) on the PRIMARYCLIM.
BACKUPCLIM backup-clim-name
is the name of the other CLIM that is connected to the disk. BACKUPCLIM must be specified.
BACKUPLUN backup-lun
specifies the logical unit number (LUN) on the BACKUPCLIM. This attribute is optional. If
BACKUPLUN is not specified, the value of PRIMARYLUN is used as the BACKUPLUN.
256 Storage Subsystem Commands