SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

INFO POOL Command
The INFO POOL command displays configuration information about a storage pool. The syntax
is:
INFO [ / OUT file-spec / ] POOL $pool
[ , { DETAIL | OBEYFORM } ] [ , SEL state ]
Wild-card characters are supported.
POOL $pool
is the storage pool process.
DETAIL
displays detailed configuration information.
OBEYFORM
displays information about the object in the format used in an ADD command.
SEL state
specifies that the command affects only devices in the specified state.
INFO POOL Examples
• To display information about a storage pool process:
-> INFO $POOL1
See the display and explanation under “Considerations for INFO POOL” (page 134).
• To display detailed information about a storage pool process:
-> INFO $POOL1 , DETAIL
See the display and explanation under “Example of a Detailed INFO POOL Report” (page 135).
INFO PROFILE Command
The INFO PROFILE command displays configuration information about the specified profile. The
syntax is:
INFO [ / OUT file-spec / ]
PROFILE $ZZSTO.#INTERNAL-DISK[-groupnum ]
[ , OBEYFORM ]
Wild-card characters are supported.
PROFILE $ZZSTO.#INTERNAL-DISK[-groupnum]
is either the standard default profile, $ZZSTO.#INTERNAL-DISK, or a user-created custom
profile for enclosure groupnum. groupnum cannot have a leading zero.
OBEYFORM
displays information about the object in the format used in an ADD command.
INFO PROFILE Examples
• To display detailed information about the standard default internal-disk profile:
-> INFO $ZZSTO.#INTERNAL-DISK
See the display and explanation under “Example of an INFO PROFILE Report” (page 54).
• To display detailed information about the internal-disk profile for group 03 disks (assuming
you have created one):
258 Storage Subsystem Commands