SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

NAMES [ / OUT file-spec / ] [ object-spec ]
[ , POOL $pool ] [ , SEL state ] [ , SUB subtype ]
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
object-spec
is one of these object types, as defined in “Storage Subsystem Objects” (page 30):
• ADAPTER
• DISK
• MON
• POOL
• PROFILE
• SAC
• SCSI
• SUBSYS
• TAPE
POOL $pool
(DISK objects only) specifies that information for disks associated only with the specified storage
pool process should be displayed.
SEL state
specifies that the command affects only devices in the specified state.
SUB subtype
($ZZSTO or DISK objects only) specifies which subtypes of the given object-spec should be
displayed.
For $ZZSTO, these subtypes are allowed (the default is ALL):
ADAPTER ALL DISK MAGNETIC MON POOL PROFILE SCSI TAPE VIRTUAL
For DISK objects, these subtypes are allowed (the default is ALL):
ALL MAGNETIC VIRTUAL
NAMES Examples
• To display the object names of all objects managed by the storage subsystem manager process:
-> NAMES $ZZSTO
STORAGE Names SUBSYS \SWEET.$ZZSTO
SUBSYS
$ZZSTO
ADAPTER
$ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-50 $ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-55
$ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50 $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
$ZZSTO.#PMF.GRP-2.MOD-1.SLOT-50 $ZZSTO.#PMF.GRP-2.MOD-1.SLOT-55
$ZZSTO.#SNDA.GRP-11.MOD-1.SLOT-51 $ZZSTO.#SNDA.GRP-11.MOD-1.SLOT-52
$ZZSTO.#SNDA.GRP-11.MOD-1.SLOT-53
DISK
$SYSTEM $SWEETX $R06WHT $R06NEV $R05WHT $R05NEV $R04NEV $OPS
$N01WHT $G02NEV $FUDD $DATA00 $D1103M $D0204 $D0118U $D0111M
262 Storage Subsystem Commands