SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

PROFILE
$ZZSTO.INTERNAL-DISK
TAPE
$TAPE4
• To display the names for all physical disks:
-> NAMES $ZZSTO, SUB MAGNETIC
DISK
$SYSTEM $SWEETX $R06WHT $R06NEV $R05WHT $R05NEV $R04NEV $OPS
$N01WHT $G02NEV $FUDD $DATA00 $D1103M $D0204 $D0118U $D0111M
$D0107M $D0105M $BROOK $AUDIT
• To display the names for all virtual disks:
-> NAMES $ZZSTO, SUB VIRTUAL
STORAGE Names SUBSYS \COMM.$ZZSTO DISK $ZIMBU
$ZERO $WIPRO $WEBVPT $WEB $WANA $VIEWPT $VCS2
$TIOGA $TEMP $TECH $TCPIP1 $SPOOL2 $SPOCK $SPLPRS
$SPLDEV $SNMP3 $SNMP2 $SNMP1 $SMTPA $SLSA1 $SLSA
$SIMS5 $SIMS4 $SIMS3 $SIMS2 $SIMS1 $SHARE1 $SFGD
$SECRET $RTOOL2 $RPSV03 …
• To display the object names of all adapters:
-> NAMES $ZZSTO, SUB ADAPTER
STORAGE Names SUBSYS \COMM.$ZZSTO
ADAPTER $ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-50 $ZZSTO.#IOMF.GRP-11.MOD-1.SLOT-55
$ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50 $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
$ZZSTO.#PMF.GRP-2.MOD-1.SLOT-50 $ZZSTO.#PMF.GRP-2.MOD-1.SLOT-55
$ZZSTO.#SNDA.GRP-11.MOD-1.SLOT-51 $ZZSTO.#SNDA.GRP-11.MOD-1.SLOT-52
$ZZSTO.#SNDA.GRP-11.MOD-1.SLOT-53
• To display the object names of all PROFILE objects managed by the storage subsystem manager
process:
-> NAMES $ZZSTO, SUB PROFILE
STORAGE Names SUBSYS \COMM.$ZZSTO
PROFILE $ZZSTO.INTERNAL-DISK
• To display the names of all SCSI devices:
-> NAMES $ZZSTO, SUB SCSI
STORAGE Names SUBSYS \COMM.$ZZSTO
SCSI $L700C16
• To display the names for all TAPE objects:
-> NAMES $ZZSTO, SUB TAPE
STORAGE Names SUBSYS \COMM.$ZZSTO
TAPE $TAPE0 $DLT25 $DLT24 $DLT23 $DLT22
PRIMARY Command
The PRIMARY command swaps the primary and backup processors for a device or process. The
current primary process becomes the backup process, and the current backup process becomes
the primary process, but the PRIMARYCPU and BACKUPCPU values stay the same.
PRIMARY Command 263