SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

-> STATUS DISK $DATA05-B, ENCRYPTION
See the examples under “Displaying Information about Encrypted Disks” (page 58).
• To display detailed encryption status for a disk:
-> STATUS DISK $DATA05-B, ENCRYPTION, DETAIL
See the examples under “Displaying Information about Encrypted Disks” (page 58).
STATUS DISK Examples For Virtual Disks
• To display the status of a virtual disk:
-> STATUS $VDISK00
See the display and explanation under “Example of a STATUS DISK Report for Virtual Disks”
(page 146).
• To display detailed status of a virtual disk:
-> STATUS $VDISK00, DETAIL
See the display and explanation under “Example of a Detailed STATUS DISK Report for Virtual
Disks” (page 147).
Attribute Descriptions for Disk Commands
See “Attribute Descriptions for Disk Commands” (page 198) for descriptions of all attributes for disk
commands.
STATUS MON Command
The STATUS MON command displays current status information about the SMF master process.
The syntax is:
STATUS [ / OUT file-spec / ] MON $ZSMS
[ , DETAIL ] [ , SEL state ]
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
MON $ZSMS
is the SMF master process.
DETAIL
displays detailed status information.
SEL state
specifies that the command affects only devices in the specified state.
STATUS MON Examples
• To display the current status of the SMF master process:
-> STATUS $ZSMS
See the display and explanation under “Example of a STATUS MON Command” (page 43).
• To display detailed status of the SMF master process:
-> STATUS $ZSMS, DETAIL
See the display and explanation under “Example of a Detailed STATUS MON Report”
(page 43).
284 Storage Subsystem Commands