SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

STATUS SAC Attributes
[ , EMU , DEVICEID (shelf, 0) ]
[ , EMULIST ]
[ , LOCATION , PORTNAME wwn ]
[ , LUNLIST , PORTNAME wwn ]
[ , LUN number ] [ , DETAIL ] ]
[ , PATHSTATUS , DEVICEID (shelf, 0) ]
[ , PORTLIST [ , PORTNAME wwn ] [ , DETAIL ] ]
[ , REPLACE , DEVICEID (shelf, 99) ]
DETAIL
displays additional information when used with LUNLIST or PORTLIST.
EMU , DEVICEID (shelf , 0)
displays a small subset of the inventory and status information from the environmental monitoring
unit (EMU).
shelf specifies the shelf number of the enclosure to which the command applies. The bay
number must be 0.
EMULIST
displays the shelf worldwide names for any EMUs visible through the SAC.
LOCATION
displays the shelf and bay of the disk with the specified PORTNAME.
LUN
specifies a Logical Unit Number (LUN) in the range 0-32767.
LUNLIST
displays the LUN numbers that are available through the specified PORTNAME. If a LUN is
specified, only that LUN is shown.
PATHSTATUS , DEVICEID (shelf, 0)
displays the status of the path to the EMU in the specified shelf. The bay number must be 0.
PORTLIST
displays the port worldwide names that are visible through the SAC. If a PORTNAME is
specified, only that PORTNAME is shown.
PORTNAME wwn
specifies the worldwide name of a port entered as a 16-character hexadecimal number without
a leading %H.
REPLACE, DEVICEID (shelf , 99)
indicates whether a replace firmware operation is being performed for the specified enclosure.
The command displays a message if the $ZFCnn process is busy updating firmware. Otherwise,
the command produces no display.
shelf specifies the shelf number of the enclosure. The bay number must be 99.
STATUS SAC Command Examples
• This command shows the worldwide names for the EMUs in the FCDMs connected to SAC 2:
-> STATUS SAC $ZZSTO.#FCSA.SAC-2.GRP-111.MOD-2.SLOT-1, EMULIST
STORAGE - Emulist Status SAC \OSM2.$ZZSTO.#FCSA.SAC-2.GRP-111.MOD-2.SLOT-1
Shelf WWN
1 500508B3005833C7
2 500508B3006814C5
• This command shows the worldwide names for all disks in enclosure 1 connected to SAC 2:
-> STATUS SAC $ZZSTO.#FCSA.SAC-2.GRP-111.MOD-2.SLOT-1, &
-> EMU, DEVICEID (1,0)
286 Storage Subsystem Commands