SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Effect
The command is not executed.
Recovery
Verify the state of the device using the STATUS command. If needed, use the RESET command
to change the state of the device before retrying the operation. If online reconfiguration of a
mirror drive is desired, your might need to terminate the $ZTSM process using ABORT PROCESS
$ZZKRN.#TSM-SRM. Restart $ZTSM after the online reconfiguration is complete.
00013
STORAGE 00013 Invalid object name format, cmdformat expected.
cmdformat
is the command format the storage subsystem was expecting.
Cause
The command was rejected by the storage subsystem manager process ($ZZSTO) because the
format of the object name was not specified properly.
Effect
The command is not executed.
Recovery
Correct the command using the proper syntax.
00014
STORAGE 00014 Internal error: Result code resultcode returned from call to procname.
resultcode
is the result code that was returned from the procedure call.
procname
is the name of the procedure call that failed.
Cause
An internal error was caused by an unexpected return code from a system procedure.
Effect
The command is not executed.
Recovery
Report this problem immediately. See “If You Have to Contact Your Service Provider” (page 298)
.
00015
STORAGE 00015 Unexpected error returned from $ZCNF, error: err-num, error detail: err-detailnum (errdesc).
err-num
is the error number returned from the $ZCNF process.
err-detailnum
is the error detail number returned from the $ZCNF process.
errdesc
is the description of the current error.
Cause
A system configuration database is corrupted.
Effect
The command is not executed.
302 Storage Subsystem Error Messages