SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

00027
STORAGE 00027 PRIMARYLOCATION and MIRRORLOCATION are equal.
Cause
You specified the same location for both the PRIMARYLOCATION and MIRRORLOCATION
attributes.
Effect
The command is not executed.
Recovery
Reissue the command specifying the correct values for PRIMARYLOCATION and
MIRRORLOCATION.
00028
STORAGE 00028 Negative response from SCSI Interface Module process, error: errnum (errdesc).
errnum
is the error number provided by the SCSI interface module.
errdesc
is the description of that error.
Cause
The SCSI interface module process is reporting a problem.
Effect
The command is not executed.
Recovery
Check the processing environment for the cause of the error and retry the command. For example,
you should verify the processors are running and check the EMS log for errors. If the problem
persists, contact your service provider. See “If You Have to Contact Your Service Provider”
(page 298).
00029
STORAGE 00029 objtype devname is not present in location (grp,mod,slot)
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
grp,mod,slot
is the group, module, and slot location of the device you specified in the command.
Cause
The device specified in a command is not physically present in the location.
Effect
The command is not executed.
Recovery
Insert the device and reissue the command. If the problem persists, contact your service provider.
See “If You Have to Contact Your Service Provider” (page 298).
00030
STORAGE 00030 objtype devname is not powered on, location (grp,mod,slot)
objtype
is the object type of the object you specified with the command.
306 Storage Subsystem Error Messages