SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

devname
is the name of the device you specified in the command.
grp,mod,slot
is the group, module, and slot location of the device you specified in the command.
Cause
The specified device is not powered on.
Effect
The command is not executed.
Recovery
Power on the device and reissue the command. If the problem persists, contact your service
provider. See “If You Have to Contact Your Service Provider” (page 298).
00031
STORAGE 00031 System configuration database ($SYSTEM.ZSYSCONF.CONFIG) is locked.
Cause
The system configuration database is busy and therefore temporarily locked.
Effect
The command is not executed.
Recovery
Wait a short while and reissue the command. If the problem persists, contact your service
provider. See “If You Have to Contact Your Service Provider” (page 298).
00032
STORAGE 00032 None of the configured processors for objtype devname are available
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
Cause
The processors configured for the device are not functioning.
Effect
The command is not executed.
Recovery
Reload one or more of the configured processors and reissue the command.
00033
STORAGE 00033 objtype devname is not configured.
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
Cause
The device specified in a command was installed in the system, but it was not configured.
Effect
The command is not executed.
Recovery
Add the device to the system configuration using the SCF ADD command. If the problem persists,
contact your service provider. See “If You Have to Contact Your Service Provider” (page 298).
Storage Subsystem Error Messages 307