SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

00034
STORAGE 00034 command failed. Mismatch between adapter ACCESSLIST. Parameter: value.
command
is the command you specified.
value
is the value you specified in the command.
Cause
The adapters controlling the device specified in the command are not controlled by the same
processors.
Effect
The command is not executed.
Recovery
Correct the values and retry the command. The adapters controlling the device must be controlled
by the same processors.
00035
STORAGE 00035 command failed. Mismatch between adapter product numbers.
command
is the command you specified.
Cause
The adapters controlling the device specified in the command do not have the same product
number.
Effect
The command is not executed.
Recovery
Correct the product numbers and retry the command. The adapters controlling the device must
have the same product number.
00036
STORAGE 00036 command failed. processor cannot access the adapters controlling the device.
command
is the command you specified.
processor
is the attribute you used in the command to specify the primary processor (PRIMARYCPU) or
backup processor (BACKUPCPU).
Cause
You specified an invalid processor number in the command. The specified processor cannot
access the adapters controlling the device.
Effect
The command is not executed.
Recovery
Reissue the command with the correct processor number. The adapters controlling the device
must be accessible from the processors specified for both the BACKUPCPU and PRIMARYCPU.
00037
STORAGE 00037 command failed. Cannot find hardware in specified parameter
(location, primary location, mirror location).
command
is the command you specified.
308 Storage Subsystem Error Messages