SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Cause
You specified different group values in the PRIMARYLOCATION and MIRRORLOCATION
attributes.
Effect
The command is not executed.
Recovery
Reissue the command using the same group value for both the MIRRORLOCATION and
PRIMARYLOCATION attributes.
00038
STORAGE 00038 objtype devname is not running.
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
Cause
A designated processor for the device is not running.
Effect
The command is not executed.
Recovery
Verify the processing environment for the device exists and retry the command. For example,
you should verify the processors are running and check the EMS log for errors.
00039
STORAGE 00039 Object is already being used.
Object
is the type of the device you specified in the command.
Cause
The device you specified in the command is already being used.
Effect
The command is not executed.
Recovery
Reissue the command and specify the correct device.
00040
STORAGE 00040 Configuration database record not found.
Cause
One or more configuration database records are missing. This can happen when the indicated
object (or parts of the object) is not configured.
Effect
The command is not executed.
Recovery
If possible, correct the configuration and reissue the command. If the problem persists, contact
your service provider. See “If You Have to Contact Your Service Provider” (page 298).
00041
STORAGE 00041 Configuration database record is in use.
Storage Subsystem Error Messages 309