SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Cause
The specified object probably has other objects dependent on its existence.
Effect
The command is not executed.
Recovery
Correct the attributes and reissue the command.
00042
STORAGE 00042 Configuration database access timeout.
Cause
The configuration database is locked by some other process.
Effect
The command is not executed.
Recovery
Wait a few seconds and reissue the command.
00043
STORAGE 00043 Wrong path specified: object-type name.
Cause
You specified a command that does not allow the specified device path.
Effect
The command is not executed.
Recovery
Correct and reissue the command.
00044
STORAGE 00044 Configuration database record already exists.
Cause
The object is already configured. The indicated object might already be configured by another
device.
Effect
The command is not executed.
Recovery
Correct the name of the object and reissue the command.
00045
STORAGE 00045 IOP is busy.
Cause
The object is busy and will not accept commands. This situation might occur when an IOP is
unable to access its hardware. Usually a status query on the process itself will show it in a wait
state of %040 (INTR).
Effect
The command is not executed.
Recovery
Correct the hardware configuration and reissue the command.
00046
STORAGE 00046 cmd will restart IOP.
310 Storage Subsystem Error Messages