SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

00055
STORAGE 00055 PRIMARYLOCATION AND BACKUPLOCATION are equal.
Cause
You specified the same location for PRIMARYLOCATION and BACKUPLOCATION.
Effect
The command is not executed.
Recovery
Reissue the command using unique values for PRIMARYLOCATION and BACKUPLOCATION.
00056
STORAGE 00056 SMF pool communication error.
Cause
The command issued resulted in a error while communicating with the SMF storage pool process.
Effect
The command is not executed.
Recovery
Reissue the command after correcting the cause of the error.
00057
STORAGE 00057 DEBUG option not valid when object is already running.
Cause
You issued a START command using the DEBUG attribute for an object that is already running.
Effect
The command is not executed.
Recovery
Use the RESET, FORCED command to stop the object and then reissue the START command.
00058
STORAGE 00058 command rejected, failed to validate request with SMF.
command
is the command you specified.
Cause
You issued a command that requires interaction with SMF. This interaction failed.
Effect
The command is not executed.
Recovery
Resolve the cause of the failure and reissue the command.
00059
STORAGE 00059 Program file is not $SYSTEM.SYSTEM.
Cause
You specified that the PROGRAM file of a storage object is located in a subvolume other than
$SYSTEM.SYSTEM. You must verify you want to use the specified subvolume. No warning is
given in noninteractive mode.
Effect
The command is executed if you answer Y at the prompt; it is not executed if you respond N at
the prompt.
Storage Subsystem Error Messages 313