SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Recovery
Answer Y or N at the prompt.
00060
STORAGE 00060 objname is in use.
objname
is the name of the object you specified in the command.
Cause
The object you issued the command to is currently in use by another requester.
Effect
In interactive mode, you are prompted to validate the request. In noninteractive mode, the
command is not executed.
Recovery
In interactive mode, validate the request. In noninteractive mode, use the FORCED option to
override this check.
00061
STORAGE 00061 Failed to obtain CRU information, error: errnum, error detail: text. CRU: cru-name
errnum
is the error number associated with this failure.
text
is additional information about the error.
cru-name
is the name of the customer-replaceable unit (CRU) you specified in the command.
Cause
You requested information for a CRU, but that information was unavailable from the hardware
inventory table.
Effect
The command is not executed.
Recovery
Verify the hardware is actually present and connected correctly.
00062
STORAGE 00062 Error from PROCESS_LAUNCH_, error: errnum, error detail: text.
errnum
is the error number returned from the PROCESS_LAUNCH_ procedure.
text
is additional information about the error.
Cause
The storage subsystem was unable to create the process.
Effect
The command is not executed.
Recovery
Refer to the error number and error detail for the cause of the error and retry the command. If
the problem persists, contact your service provider. See “If You Have to Contact Your Service
Provider” (page 298).
00063
STORAGE 00063 cmd failed. SAC in use by incompatible devices, sacpath.
314 Storage Subsystem Error Messages