SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Effect
The command is not executed.
If the problem persists, contact your service provider. See “If You Have to Contact Your Service
Provider” (page 298).
00078
STORAGE 00078 REPLACE DISK volname software replacement record insert, error:err-num.
volname
is the disk name you specified.
err-num
is the file-system error that occurred. For more information, refer to the Guardian Procedure
Errors and Messages Manual.
Cause
A file-system error occurred while data was being read from $SYSTEM.SYSnn.CONFALT.
Effect
The command is not executed.
If the problem persists, contact your service provider. See “If You Have to Contact Your Service
Provider” (page 298).
00079
STORAGE 00079 The replace operation is not committed.
Cause
You have issued the REPLACE, REVERT command after a committed replace operation.
Effect
The command is not executed.
Recovery
Issue the REPLACE, ABANDON command.
00080
STORAGE 00080 A replace operation is still pending.
Cause
A REPLACE, PROGRAM or REPLACE, AGAIN operation has not finished.
Effect
The command is not executed.
Recovery
Follow these steps:
1. Wait for the operation to finish.
2. If it does not finish, reactivate it with the REPLACE, AGAIN command.
3. If the problem persists, contact your service provider. See “If You Have to Contact Your
Service Provider” (page 298).
00081
STORAGE 00081 volname is not running as a process pair.
volname
is the disk name you specified.
Cause
You issued a REPLACE command for a disk that is not running as a process pair.
Effect
The command is not executed.
Storage Subsystem Error Messages 319