SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

00088
STORAGE 00088 REPLACE DISK volname new object file error: err-num.
volname
is the disk name you specified.
err-num
is the file-system error that occurred. For more information, refer to the Guardian Procedure
Errors and Messages Manual.
Cause
You initiated a replace operation, and a file-system error occurred while the new object file was
being verified.
Effect
The command is not executed.
Recovery
1. Ensure that the correct object is present.
2. Retry the command.
00089
STORAGE 00089 Non-supported adapter found where devname was expected.
devname
is the device name expected by SCF.
Cause
SCF found a nonsupported adapter where it expected to find a supported storage adapter.
Effect
The command is not executed.
Recovery
Recovery depends on the results you want.
If you want a storage adapter configured in the slot:
1. Remove whatever is in the slot.
2. Insert the storage adapter you want.
3. Retry the command.
If you do not want a storage adapter configured in the slot, delete the storage adapter
configuration record for that slot.
00090
STORAGE 00090 Vproc verification error: err-num, error detail: err-detail.
err-num
is the PROCESS_CREATE_ error that occurred. For more information, refer to the Guardian
Procedure Errors and Messages Manual.
err-detail
is the error detail for the PROCESS_CREATE_ error. For more information, refer to the
Guardian Procedure Errors and Messages Manual.
Cause
You issued the REPLACE, PROGRAM command. The version procedure check for this command
was not executed.
Effect
The command is not executed.
322 Storage Subsystem Error Messages