SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Cause
You tried to perform an action that is invalid for the specified disk volume.
Effect
The command is not executed.
Recovery
To determine why the command failed, consult the accompanying error message.
00105
STORAGE E00105 I/O operation failed.
Cause
The command failed when trying to send a command to the I/O process.
Effect
The command is not executed.
Recovery
Collect the information in the error text and contact your service representative for further
assistance.
00106
STORAGE E00106 The two paths to a device must be in different IOAM modules
Cause
You have specified two paths to a device through FCSA adapters in the same IOAM module.
This configuration is not recommended.
Effect
The command is not executed. SCF waits for the next command
Recovery
Specify the two paths in different IOAM modules.
00107
STORAGE E00107 The requested configuration requires that Advanced Storage Configuration is enabled in OSM
Cause
The requested device path configuration requires that Advanced Storage Configuration be
enabled in G-series versions of OSM. Advanced Storage Configuration is required for device
configuration options which became available in T1083ABC (G06.23) including Enclosure
Interleaving and Enterprise Storage (ESS) disks.
Effect
The command is not executed.
Recovery
Run the OSM Service Connection and select the action to Enable Advanced Storage
Configuration.
00108
STORAGE E00108 Cannot configure the specified device without a license file.
Cause
Configuration of the device type is not allowed without a license file.
Effect
The request is not processed.
Recovery
Install the required license file. For Enterprise Storage disks, the required license file is in the
T0631 product.
326 Storage Subsystem Error Messages