SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

00138
STORAGE W00138 Disk volume paths to the partition are in STOPPED state.
Cause
Warning: A configured NonStop disk partition is to be deleted.
Effect
In interactive mode, you are prompted to validate the request. In noninteractive mode, the
command is not executed.
Recovery
Make sure the correct disk partition is to be deleted. In interactive mode, validate the request.
In noninteractive mode, use the FORCED option to override this check.
00139
STORAGE E00139 A mismatch of WRITECACHE attribute value was detected
among partitions on the same device.
Cause
There is a mismatch of WRITECACHE attribute value among partitions on the same device.
Effect
The command is not executed.
Recovery
When adding a disk partition, make sure that the Write Cache setting for the new partition
matches with the Write Cache setting of the existing partitions.
00140
STORAGE E00140 The device specified is not partitioned.
Cause
The device specified is not partitioned.
Effect
The command is not executed.
Recovery
Add partitions to the device using SCF ADD PARTITION command.
00141
STORAGE W00141 The DELETE PARTITION command will destroy any existing partitions
or files on the device.
Cause
Warning: The DELETE ALL PARTITION or the ADD PARTITION, LIKE command will destroy any
existing partitions or files on the device. The DELETE LAST PARTITION command will destroy
any existing files on the last partition.
Effect
In interactive mode, you are prompted to validate the request. In noninteractive mode, the
command is not executed.
Recovery
Make sure the existing files can be deleted. In interactive mode, validate the request. In
noninteractive mode, use the FORCED option to override this check.
00142
STORAGE E00142 The source device specified is same as target device.
Cause
For the ADD PARTITION, LIKE command, the source device specified is same as the target device.
332 Storage Subsystem Error Messages