SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Effect
The command is not executed.
Recovery
1. Reissue the command with the FORCED command option.
2. Execute the command from an interactive SCF prompt.
01008
STORAGE 01008 The command rejected, the disk contains numberof open files.
command
is the SCF command that you issued.
numberof
is the number of open files that exist for the device you specified in the command.
Cause
You issued a command that attempted to stop a disk that has open files.
Effect
The command is not executed.
Recovery
Either:
• Close all the open files on the disk and reissue the original command.
• Reissue the command with the FORCED command option.
01009
STORAGE 01009 The ALTER DISK, CACHE operation might cause SEVERE performance problems on volname.
volname
is the name of the volume that you specified in the command to alter cache.
Cause
You issued an ALTER DISK, CACHE command in noninteractive mode. In interactive mode, you
are prompted to verify the operation.
Effect
The cache counters are reset.
Recovery
Informational message only; no corrective action is required.
01010
STORAGE 01010 The ALTER DISK, LABEL command will DESTROY any existing files on volname.
volname
is the name of the volume that you specified in the command to rewrite the label.
Cause
You issued the ALTER DISK, LABEL command in noninteractive mode. The ALTER DISK, LABEL
command is available only in interactive mode. In interactive mode, you are prompted to verify
the operation.
Effect
The label operation is not performed.
Recovery
1. Start SCF and reissue the command from the SCF prompt.
2. Remove the command from the SCF command file.
336 Storage Subsystem Error Messages