SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Effect
The disk sector is not spared.
Recovery
1. Verify you used the correct sector address.
2. Reissue the command with the correct address, if needed.
01015
STORAGE 001015 The STATS DISK, RESET command will reset the counters used to compute the cache
performance statistics on volname.
volname
is the name of the volume that you have specified a statistical reset for.
Cause
You issued the STATS DISK, RESET command in noninteractive mode. The STATS DISK, RESET
command is available only in interactive mode. In interactive mode, you are prompted to verify
the operation.
Effect
The statistics counters are not reset.
Recovery
1. Start SCF and reissue the command from the SCF prompt.
2. Remove the command from the SCF command file.
01016
STORAGE 01016 command rejected, the last path to volname cannot be stopped!
command
is the SCF command that you issued.
volname
is the name of the system disk volume that you specified in the command.
Cause
You issued a command that would stop the last path to the system disk.
Effect
The command is not executed.
Recovery
If you really want to stop the last path to the system disk, reissue the command using the FORCED
option.
01017
STORAGE 01017 command, processornum failed.
command
is the SCF command that you issued.
processornum
is the processor number of the processor you specified in the command.
Cause
You issued a command to change processor ownership but the storage subsystem manager
process detected that it did not occur, even though no error was returned from the disk process.
Effect
The processor ownership is unchanged.
Recovery
Check the EMS log for messages pertaining to the problem.
338 Storage Subsystem Error Messages