SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Effect
In interactive mode, you are prompted to confirm the operation. In noninteractive mode the
operation is performed.
Recovery
Copy the SCF program to a disk other than $SYSTEM before continuing. Do not exit SCF without
having another copy on another disk.
01043
STORAGE 01043 Operation succeeded, disk name contains num open files
name
is the name of the disk that has open files.
num
is the number of open files on the disk.
Cause
You issued a STOPOPENS command for a disk with open files.
Effect
The command is not executed.
Recovery
Informational message only; no corrective action is required.
01044
STORAGE 01044 ALTER DISK $DATA00, Autoselect change failed, error errnum
errnum
is the error number provided by the file-system.
Cause
Something is preventing the Autoselect change from finishing.
Effect
The command is not executed.
Recovery
Correct the problem indicated by the file-system error code and reissue the command.
01045
STORAGE 01045 ALTER DISK $DATA00, Physvolselect change failed, error errnum
errnum
is the error number provided by the file-system.
Cause
Something is preventing the Physvolselect change from finishing.
Effect
The command is not executed.
Recovery
Correct the problem indicated by the file-system error code and reissue the command.
01046
STORAGE 01046 Not allowed: The disk belongs to a storage pool.
Cause
This command, if executed, would leave the storage pool in an inconsistent state.
Effect
The command is not executed.
Storage Subsystem Error Messages 345