SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Recovery
Remove the disk from the storage pool and reissue the command.
01047
STORAGE 01047 Not allowed: The disk is audited.
Cause
This command, if executed, would leave the TMF product in an inconsistent state.
Cause
The command is not executed.
Recovery
Disable the disk under the TMF product and reissue the command.
01048
STORAGE 01048 Sector secnum is out of range. Maximum is maxsecnum
secnum
is the sector number you specified with the command.
maxsecnum
is the largest number allowed for the sector number.
Cause
You have specified a sector number that is beyond the last sector number on the disk.
Effect
The command is not executed.
Recovery
Determine the correct sector number and reissue the command.
01049
STORAGE 01049 cmd rejected, disk is not mirrored.
cmd
is the command that you issued.
Cause
You issued a command to a nonmirrored disk that can only be used for mirrored disks.
Effect
The command is not executed.
Recovery
Determine the correct disk, or change the command you are issuing to the nonmirrored disk.
01050
STORAGE 01050 devname is currently running unmirrored. REPLACEBOOT operation cannot be performed.
devname
is the name of the device you specified in the command.
Cause
You issued the CONTROL DISK, REPLACEBOOT command in noninteractive mode. This command
is available only in interactive mode. In interactive mode, you are prompted to verify you want
to replace the disk boot code on a disk that is configured to be mirrored but is running
nonmirrored.
Effect
The command is not executed.
346 Storage Subsystem Error Messages