SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Recovery
Issue the command with the correct names.
09033
STORAGE 09033 Required attribute not specified attribute.
attribute
is the name of an attribute.
Cause
You issued a command without specifying a required attribute.
Effect
The command is not executed.
Recovery
Make the request again, using the required attribute.
09034
STORAGE 09034 devname cannot be configured on a sacname which is on an adaptername.
devname
is the name of the device you specified in the command.
sacname
is the name of the SAC you specified in the command.
adaptername
is the name of the adapter you specified in the command.
Cause
The configurations of the device, the SAC, and the adapter are incompatible.
Effect
The command is not executed.
Recovery
Make the request again, specifying a compatible configuration.
09035
STORAGE 09035 Can’t delete pool because a disk profile refers to the pool.
Cause
You attempted to delete a storage pool that is referenced by a disk profile.
Effect
The command is not executed.
Recovery
1. Issue the INFO, PROFILE command to determine which disk profiles refer to the storage
pool.
2. Delete the disk profile that refers to the pool.
3. Retry the command.
09036
STORAGE 09036 Invalid attribute values: Controller SCSI ids are the same for both SACs.
Cause
You attempted to add a SCSI device that has the same controller IDs on both its primary and
backup SAC.
Effect
The command is not executed.
360 Storage Subsystem Error Messages