SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

STATUS command, 280
SWITCH command, 294
CLIM-attached disks
ADD DISK example, 83
description of, 71
CLuster I/O module see CLIM
Command file
behavior of SCF commands in, 191
helps change configuration safely, 27
using OBEYFORM results in, 27
Command timeouts, 192
COMPRESSION attribute
ADD TAPE command, 226
ALTER TAPE command, 242
CONFIG attribute
INFO DISK command, 254
INFO DISK display, 50
CONFIG-ERROR substate, description of, 34
Configuration information
See INFO command, 253
Configuration state of virtual disk
in INFO DISK report, 145
in STATUS DISK report, 148
Configuration state,in INFO DISK report, 148
Configuring see Adding
CONTROL command, 244
Correcting doubly allocated file extents, 106
CPU attribute, REPLACE ADAPTER command, 270
CRU replacement, 167, 266, 294
Current status information
See STATUS command, 279
Custom profile see Profile, custom
D
Data path, primary, description of, 28
DEBUG attribute, START command, 274
DEFAULT attribute
PRIMARY SUBSYS command, 267
SWITCH ADAPTER command, 294
Defect log of spared sectors, displayed by INFO DISK
command, 63
Defective sector
listed in INFO, LOG display, 63
sparing, 104
DELETE ADAPTER command, 167
DELETE command, 248
DELETE DISK command
disk, 94
virtual disk, 150
DELETE MON command, 45
DELETE PARTITION command
syntax, 250
DELETE POOL command, 140
DELETE PROFILE command, 76
DELETE SCSI command, 176
DELETE TAPE command, 187
Deleting
adapter, 166
custom profile, 76
disk, 93
Open SCSI device, 176, 177
SMF master process, 45
storage pool, 140
tape drive, 187
virtual disk, 150
DENSITY attribute
ADD TAPE command, 226
ALTER TAPE command, 242
DETAIL attribute
INFO command, 253
STATUS command, 280
VERSION command, 297
Device states and substates
See States and substates, SCF, 34
DEVICEID attribute
ADD TAPE command, 226
ALTER TAPE command, 242
CONTROL SAC command, 247
REPLACE SAC command, 270
disk
status information for, 62
Disk attributes, 195, 196, 198
Disk cache, reconfiguring, 86
Disk load balancing, 118
Disk naming conventions, set by NAMEMASK attribute,
208
DISK object
ABORT command, 193
ADD command, 194
ALLOWOPENS command, 227
ALTER command, 228
CONTROL command, 244
DELETE command, 248
INFO command, 254
INITIALIZE command, 260
PRIMARY command, 264
RENAME command, 269
RESET command, 271
START command, 274
states and substates, 34
STATS command, 277
STATUS command, 282
STOP command, 290
STOPOPENS DISK command, 293
SWITCH command, 295
Disk object
attribute descriptions, 198
attributres, 195, 196
Disk path configuration, 71
Disk path information, 52
Disk types, description of, 70
DISKINTERVAL attribute
ADD POOL command, 219
ALTER POOL command, 234
Disks
adding, 82
allowing file opens, 109
altering, 84
375