SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

description of, 34
resetting, 103
STATUS command display, 102
HIGHPIN attribute
ADD MON command, 216
ADD POOL command, 220
ADD SCSI command, 224
ADD TAPE command, 226
ALTER DISK command
changing, 85
description of, 204
ALTER MON command, 233
ALTER POOL command, 235
ALTER SCSI command, 238
ALTER TAPE command, 243
I
IGNOREINCONSISTENCY attribute
DELETE DISK command, 249
DELETE POOL command, 251
description of, 204
INACCESSIBLE substate, description of, 34
INFO ADAPTER command
IOMF display example, 155
PMF display example, 154
SNDA display example, 156
INFO command, 253
INFO DISK command
disk examples, 49
syntax, 254
virtual disk examples, 144
INFO MON command, examples, 42
INFO PARTITION command
syntax, 256
INFO POOL command
display differs if $ZSMS is not started, 135
examples, 134
INFO PROFILE command, examples, 54
INFO SCSI command, examples, 171
INFO SUBSYS command, example, 40
INFO TAPE command, examples, 180
INITIALIZE command, 260
INITIALIZE DISK command, 92
Initializing M8xxx disks, 72, 82
Interactive mode, commands in, 191
Interleaving enclosures see Enclosure interleaving
Internal disks
ADD DISK example, 83
automatically configuring with a profile, 75
description of, 70
finding nonconfigured, 48
IOMF adapter type, specified by ADAPTER object, 32
IOMF display example
INFO ADAPTER command, 155
STATUS ADAPTER command, 160
K
Kernel-Managed Swap Facility (KMSF) swap files, 101
KEYALGORITHM attribute, description of, 205
KEYGENPOLICY attribute
ALTER TAPE command, 243
KEYSIZE attribute, description of, 205
KMSF (Kernel-Managed Swap Facility) swap files, 101
L
LABEL attribute
changing, 91
disks, 85
INFO DISK command, 255
INITIALIZE DISK command, 261
not copied from the LIKE object, 229
physical disks, 205
Label information, for disks, 52
Labeled-tape processing, enabling or disabling, 188
LABELTAPE attribute, ALTER SUBSYS command
description of, 188
syntax, 241
LASTPARTITION attribute
DELETE PARTITION command, 250
ldev number
LISTDEV command, 28
STATUS command, 64
STATUS DISK command, 147
STATUS MON command, 43
STATUS POOL command, 137
STATUS SCSI command, 174
STATUS TAPE command, 182
LED attribute, CONTROL SAC command, 247
LIKE attribute
ADD DISK command, 195
ADD PARTITION command, 217
ADD POOL command, 219
ADD PROFILE command, 222
ADD SCSI command, 223
ADD TAPE command, 225
adding a disk, 83
adding a storage pool, 137
adding a tape drive, 186
adding a virtual disk, 148
adding an Open SCSI device, 175
ALTER DISK command, 229
ALTER POOL command, 234
ALTER SCSI command, 237
ALTER TAPE command, 242
compared to OBEYFORM attribute of INFO command,
27
LISTDEV command
description of, 28
LKIDLONGPOOLLEN attribute
changing, 85
description of, 205
LKTABLESPACELEN attribute
changing, 85
description of, 205
Load balancing
between fabrics, 118
between processors, G06.10 and earlier, 123
between processors, G06.10 and later, 119
377