SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

The processor number of the primary SMF master process.PrimaryCPU
The object file name of the SMF master process.Program
Example of a Detailed INFO MON Report
-> INFO MON $ZSMS, DETAIL
STORAGE - Detailed Info MON \COMM.$ZSMS
*BackupCPU............................. 4
CatalogLocation....................... $VIRCFG.ZSMSCAT0
*HighPin............................... OFF
*Mode.................................. QUIET
*PrimaryCPU............................ 5
*Program............................... $SYSTEM.SYSTEM.OMP
Explanation of Fields — Detailed INFO MON Report
An attribute whose value you can change by using an ALTER MON command.*
The processor number of the backup SMF master process.BackupCPU
The location of the catalog for the SMF master process.CatalogLocation
Shows whether the IOP can run at a high PIN (ON) or a low PIN (OFF). The PIN is the process
identification number.
Highpin
Shows whether the SMF master process generates additional EMS messages.Mode
The processor number of the primary SMF master process.PrimaryCPU
The object file name of the SMF master process.Program
Displaying Current Status Information
The “STATUS MON Command” (page 284) displays status information about the SMF master
process.
Example of a STATUS MON Command
-> STATUS MON $ZSMS
STORAGE - Status MON \COMM.$ZSMS
LDev State Primary Backup Type Subtype
PID PID
79 STARTED 5,30 4,39 52 0
Example of a Detailed STATUS MON Report
-> STATUS MON $ZSMS, DETAIL
STORAGE - Detailed Status MON \COMM.$ZSMS
Mon Process Information:
LDev State Primary Backup Type Subtype
PID PID
79 STARTED 5,30 4,39 52 0
Mon I/O Process Information:
Library File.......
Program File....... $SYSTEM.SYS01.OMP
Explanation of Fields — Detailed STATUS MON Report
The logical device number for the SMF master process.LDev
Displaying Information 43