SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

Pool Information:
Autoselect............ ON Pool..................... $POOL01
Physvolselect......... ON
Shows whether Autoselect attribute of the disk is ON or OFF. When on, the physical volume is
automatically considered for file placement when the placement decision is left up to the virtual disk
process.
Autoselect
The name of the storage pool that the disk is in.Pool
Shows whether the Physvolselect attribute of the disk is set ON or OFF. When on, the virtual disk
process is allowed to consider the physical volume for file placement.
Physvolselect
Process Information
• Process information is displayed if the name of the object file for the running disk process is
not the same as the name of the object file for the configured disk process. This difference
indicates either that the alternate disk process was activated or that the active object file for
the configured disk process was renamed.
In either case, a STATUS, DETAIL command displays:
Process Information:
OSR state............. Active OSR substate............. Active
Installed............. 07 Jul 2001, 13:12:25.369
Committed............. n/a
Configured program.... $SYSTEM.SYSTEM.TSYSDP2
Alternate program..... $SYSTEM.SYS77.TSYSTEST
Primary executes...... $SYSTEM.SYS77.TSYSTEST
Backup executes....... $SYSTEM.SYS77.TSYSTEST
The current state of an online software replacement (OSR) operation:OSR State
Abort—The alternate disk process is being replaced by the configured disk process.
Active—The alternate disk process has replaced the configured disk process and is currently
running.
Install—The operation to replace the disk process has begun.n/a—No state information is
available.
Revert—The alternate disk process is being replaced by the configured disk process.
The current substate of the online software replacement (OSR) operation:OSR substate
Active—The OSR operation is complete: the alternate disk process is running as both the
primary and backup process.
Phase 1—The backup disk process is being replaced.
Phase 2—The primary disk process is being replaced.
n/a—No substate information is available. Either the replacement operation did not complete
or the object file for the running disk process was renamed.
Preparing—The online software replacement (OSR) operation is starting.
The date and time of the last successful online software replacement (OSR) operation for
this disk process.
Installed
n/a—The replacement operation did not complete or the object file for the running disk
process was renamed.
The date and time when the alternate program was committed.Committed
n/a—The disk alternate disk process has not been committed, or the object file for the
running disk process was renamed.
The object-file name in the system configuration database; this is the configured disk process
of this disk volume.
Configured program
The object-file name of the alternate disk process stored in the SYSnn.CONFALT file.Alternate program
68 Displaying Information About Disk Drives