SCF Reference Manual for the Storage Subsystem (G06.28+, H06.05+, J06.03+)

The object-file name of the disk process currently running as the primary process.Primary executes
The OSR state and OSR substate fields indicate whether the configured disk process was
replaced by the alternate disk process. If the alternate disk process replaced the configured
disk process but was automatically abandoned, the configured object-file name is displayed
in this field.
If you rename the object-file for the disk process after it is running, the name displayed in
this field could be a unique name that does not match either the name of the configured
object-file name of the disk process or the object-file name of the alternate disk process.
The object-file name of the disk process currently running as the backup process.Backup executes
The detailed description for the Primary Executes also applies to this field.
Revive Information
If the disk is in the middle of a revive operation (from the “START DISK Command” (page 274)), a
STATUS, DETAIL command displays:
Revive Information:
Current Logical Sector............ %HFDC8 of %H7E5B71 (0%)
Blocks Per Interval............... 1
Interval.......................... 100 * 10 milliseconds
Explanation of Fields — Revive Information
Which logical sector is being revived. The value has the format s of l (p %), where:
s—the current sector being revived, in hexadecimal.
Current Logical Sector
l—the last sector of the disk, in hexadecimal.
p—the percentage of disk revived so far.
The number of blocks copied during each interval (from the system configuration database)Blocks Per Interval
The maximum interval (in 10-millisecond units) between each copy operation when the disk
is being revived. The range is 1 (10 milliseconds) through 32767 (more than 5 minutes).
The default value is 100 units (one second).
Interval
Displaying Error and Current Status Information 69