SCSI Extender Installation and User's Guide

SCSI Extender Overview
SCSI Extender Installation and User’s Guide—522347-002
1-6
SCSI IDs
* These model numbers and associated servers are only examples. For more
information about which PMF CRU model numbers and associated servers contain
PMF or PMF 2 CRUs, refer to the NonStop S-Series Planning and Configuration
Guide.
SCSI IDs
The SCSI IDs as listed in Table 1-5 are preconfigured on the SCSI extenders or tape
drives to run on a HP NonStop S-Series server, and do not need to be reconfigured:
Table 1-4. Supported SCSI Ports
CRU
CRU Model
Number
Associated
Server Port
Supported
SCSI port?
IOMF 1952 Any NonStop
S-series
server
Differential SCSI port
with an external SCSI
passthrough terminator
No
IOMF 2 1980 Any NonStop
S-series
server
Differential SCSI port
with an ultra SCSI PIC
Yes
ServerNet/DA 6760 Any NonStop
S-series
server
6762 S-SAC Yes
ServerNet/DA 6760 Any NonStop
S-series
server
6761 F-SAC No
PMF 1950
1951
1954
1960 *
S7000
S7400
S7000
S72000 *
Differential SCSI port
with an external SCSI
passthrough terminator
No
PMF 2 1961
1970
1971
1972 *
S7600
S74000
S76000
S86000 *
Differential SCSI port
with an ultra SCSI PIC
Yes
Table 1-5. Pre-configured SCSI IDs
Device SCSI ID
SCSI-to-Fiber extender (CTSFE) 8
Fiber-to-SCSI extender (CTFSE) 9
Tape drives 5