SeeView Manual

Introduction
HP NonStop SeeView Manual—526355-004
1-2
Exiting the SeeShell
The SeeShell main menu appears:
To select an item from a menu, move the cursor to the desired item by using the TAB
key or the cursor arrows, and press Return to select the item at the cursor. Pressing
Return causes the SeeView program to execute any commands associated with the
menu item you selected.
When several menus are displayed, you do not have to exit one menu before making a
choice from another. In the SeeView environment, all menus displayed are always
active. If you make a wrong choice or complete a function, you can move the cursor to
another menu item (on any menu) and select a new item to continue.
Some menus contain input fields, areas for you to type in information, which will
customize the action of the menu. These menus typically appear on the screen when
you need to enter some information to complete a menu selection.
Exiting the SeeShell
To exit the SeeShell, press SF16. The SeeView program displays a warning message
saying that all SeeView activity will be stopped and prompts you to press SF16 again if
you still want to exit.
Logging Off From the SeeShell and Preserving Your
SeeShell Session
To log off the SeeShell and still preserve your SeeShell session, select the Goodbye
option from the SeeView Extras menu. To log back into the SeeShell session, type
HELLO at the sill (the bottom of the window) and enter the same password you use to
log on to the system.
Exiting SeeShell in Edit Mode
You can exit the SeeShell at any time as long as you do not have any windows open in
edit mode. The SeeView program does not let you exit if an edit-mode window is open,
and the program displays a warning message to prevent you from accidently losing
editing changes.
To exit the SeeShell in your edit mode: