SeeView Manual

HP NonStop SeeView Manual—526355-004
3-1
3 Using the SeeView Program
Running the SeeView Program
To start SeeView, at the TACL prompt:
1> SEEVIEW /NAME/
SeeView Startup Syntax
The syntax for the SeeView startup command follows. For information on installing the
SeeView program and more details on SeeView startup modes, see Appendix A,
Running the SeeView Program.
NAME [pid]
specifies the process name of the SeeView program.
The SeeView program must be named.
IN file
specifies an alternate SeeView shell input file.
OUT file
specifies the terminal that the SeeView program will open.
option
specifies any standard TACL run option. For a description of the standard TACL
run options, see the TACL Reference Manual.
statement
specifies one or more SeeView statements described in Section 9, SeeView
Statements and Script Symbols.
Exiting the SeeView Program (SF16)
To exit the SeeView program, press SF16. The SeeView program displays a warning
message saying that all SeeView activity will stop and prompts you to press SF16
again if you want to exit.
You can exit the SeeView program at any time provided you do not have any open
windows that are in edit mode. The SeeView program does not let you exit if an edit-
mode window is open, and the program displays a warning message to that effect.
SEEVIEW/ NAME [ pid ] [ ,IN file ] [ ,OUT file] [,option ] /
[ statement ]