SeeView Server Gateway (SSG) Manual

SSG Commands
HP NonStop SeeView Server Gateway (SSG) Manual—526356-004
4-18
STATUS Command
START \CHICAGO
START \NEWYORK
START \SANFRAN
Consideration
Gateway process behavior is based on the current values of the SET command
parameters when the process is started.
STATUS Command
The STATUS command provides status information about the SSG system in the
specified node.
*
specifies status information on all nodes.
GATEWAY
requests information on the Gateway. GATEWAY is the default.
node-name
specifies the individual system for which information is to be displayed.
*
specifies status is to be returned on all Gateway processes.
taskid
specifies the name of one of the processes controlled by the SSG; for example,
PATHCOM, PATHMON, or the RSC TDP.
TRACE DISK
indicates that an execution trace is to be performed to disk in the current SSGVOL.
This command is for debugging only.
TRACE OFF
turns off the execution trace. This command is for debugging only.
STATUS [ \* ] [ GATEWAY ] [ * ]
[ \node-name ] [ taskid ]
[ TRACE DISK ]
[ TRACE OFF ]