SeeView Server Gateway (SSG) Manual

System Setup (Pre-D48)
HP NonStop SeeView Server Gateway (SSG) Manual—526356-004
2-19
Remote Node Installation
Conversely, if you do not want to install SSG remotely, but you want to install
SeeView remotely, clear the SSG Installation subvol field and use the cursor
down arrow to move on to the next field.
4. After you fill out the fields in the SSG Remote Install Configuration panel, select
START REMOTE INSTALL.
SSG displays a menu of all node names in your network, as shown in Figure 2-18.
5. To specify the nodes that you would like to control remotely with the SSG, use the
Please select node(s) menu, shown in Figure 2-18.
Select as many nodes as you like. As you select the nodes, each node name
appears in the Selected Nodes window, shown in the lower right of Figure 2-18.
To clear a node, move the cursor to a selected node name in the Please select
node(s) menu and press the Return key. That node name is then removed from the
Selected Nodes window.
6. After you select all the nodes you want to install remotely, put the cursor in the
START REMOTE INSTALL field and press the Return key.
Figure 2-18. Selecting Remote Install Nodes for Remote Install