SeeView Server Gateway (SSG) Manual

System Setup (Pre-D48)
HP NonStop SeeView Server Gateway (SSG) Manual—526356-004
2-61
RSC Setup for SSG
[T22T0]
;[RSC]
;------------------------------------------------------------------------
; RSCASY Asychronous Config (T22T0)
;------------------------------------------------------------------------
subsystem_name = RSCASY ; Name of the RSC comm subsystem to be used.
term_template = SSGTEMPL ; This must equal template in "SSGRSC" host
file.
error_file = RSC.ERR ; Temporary workaround due to RSC problem.
asyncport_type = EIA
baud_rate = 19200
com_port = 1
data_bits = 7
stop_bits = 1
parity = EVEN
[LAN1]
;[RSC]
;------------------------------------------------------------------------
; RSCNET Multilan Config (LAN1)
;------------------------------------------------------------------------
subsystem_name = RSCNET ; Name of the RSC comm subsystem to be used.
term_template = SSGTEMPL ; This must equal template in "SSGRSC" host
file.
error_file = RSC.ERR ; Temporary workaround due to RSC problem.
host_netname = SSGHOST
lana_number = 0
local_netname = SSGLN01
[TDPPORT01]
;[RSC]
;------------------------------------------------------------------------
; RSCTCP TCP/IP options. (TDPPORT01)
;------------------------------------------------------------------------
subsystem_name = RSCTCP ; Name of the RSC comm subsystem to be used.
term_template = SSGTEMPL ; This must equal template in "SSGRSC" host
file.
error_file = RSC.ERR ; Temporary workaround due to RSC problem.
host_inet_address = 138.252.41.255.1025
local_inet_address= 1
Example 2-1. RSC.INI File Generated From Previous Examples (page 2 of 2)