ServerNet Cluster 6770 Hardware Installation and Support Guide

Installing Switch Components in an EIA Standard
Rack
ServerNet Cluster 6770 Hardware Installation and Support Guide—522544-002
5-4
Task 3: Install the Cage Nuts
Task 3: Install the Cage Nuts
Some T25 Torx screws need cage nuts. You must install the cage nuts in the front of
the rack in a different pattern than in the back of the rack.
1. At the back of the rack, use the cage-nut fitting tool to install 8 cage nuts in the
locations shown in Figure 5-1 .
Figure 5-1. Locations of Cage Nuts in the Back of Rack
VST920.vsd
Cage Nuts for
Cable Management
Assembly
Cage Nuts for
Cable Tray
Cage Nuts for
UPS