ServerNet Cluster 6770 Hardware Installation and Support Guide

Troubleshooting
ServerNet Cluster 6770 Hardware Installation and Support Guide—522544-002
8-8
Monitoring a ServerNet II Switch
8 through
11
(green)
LED is lit. A good connection has been
established between a ServerNet II
Switch port and another switch on
the same fabric.
No action is required.
LED is not
lit.
If there is only one ServerNet II
Switch per fabric, this status is
expected.
No action is required
if another switch is
not connected to
these ports.
If there is more than one switch on
the same fabric, a good connection
has not been established between a
ServerNet II Switch port and another
switch on that fabric.
If another switch
should be connected
to this port, refer to
Verifying the
Connection Between
ServerNet II Switches
on page 8-20.
Table 8-2. Fabric LEDs
LED Type Status Meaning Recovery Action
X LED
(green)
LED is lit on
a switch for
the X fabric.
The LED is set correctly. No action is required.
LED is not
lit on a
switch for
the X fabric.
The LED is not set correctly. Refer to Resetting the
Fabric LED on the
ServerNet II Switch
on page 8-23.
LED is lit on
a switch for
the Y fabric.
The LED is not set correctly. Refer to Resetting the
Fabric LED on the
ServerNet II Switch
on page 8-23.
Table 8-1. ServerNet Port LEDs
LED Status Meaning Recovery Action