ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster 6780 Operations Guide—525606-002
4-16
STATUS SUBNET Command Example
SNETMON CPU States
provides an individual path state summary code for the connections between the
local node and a particular processor of a particular ServerNet node. The path
state codes are as follows:
Remote ServerNet
describes the status of a remote node’s ServerNet connection to the local node,
where:
LocLH
is the status (UP or DN) of the local Expand-over-ServerNet line and its LDEV
number.
RemLH
is the status (UP or DN) of the remote Expand-over-ServerNet line.
SCL
is the status of Expand over ServerNet between the local and remote node.
Possible values are CONN (connected) or NCONN (not connected).
EXPAND
indicates if the local node is connected (CONN) or not connected (NCONN) to a
particular remote node using any Expand connection (even if multiple hops
separate the two nodes).
Path State
Code Description
0 The paths are down because the processor is down or the processor
does not exist.
1 The paths and processor are up without errors.
P The processor is up, but there are errors on both internal fabrics.
X The processor is up, but there is an error on the internal X fabric.
Y The processor is up, but there is an error on the internal Y fabric.
p The processor is up, but there are errors on both external fabrics.
x The processor is up, but there is an error on the external X fabric.
y The processor is up, but there is an error on the external Y fabric.
Note. If errors are present on both the internal and external paths, only an internal path
error is indicated. To obtain more detailed information, use the DETAIL, LOCAL, or NODE
option.