ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

ServerNet Cluster 6780 Operations Guide—525606-002

5-1

SCF Commands for the External

ServerNet SAN Manager Subsystem

This section describes the SCF commands for the external ServerNet system area

network (SAN) manager subsystem (SMN). The SMN subsystem is used to manage

the external ServerNet SAN manager process (SANMAN). For a complete description

of SANMAN, see Appendix A, ServerNet Cluster Software.

For information on starting SANMAN, see Starting the External ServerNet SAN

Manager Process (SANMAN) on page 2-4. For information on adding SANMAN to the

configuration database, see the ServerNet Cluster 6780 Planning and Installation

Guide.

Table 5-1 lists the SCF commands for the SMN subsystem.

Note. Commands that are generally supported by SCF, such as the ASSUME, ENV, and

TRACE commands, are documented in the SCF Reference Manual for G-Series RVUs. Kernel

subsystem SCF commands such as ABORT, ADD, and START for managing generic (system-

managed) processes (such as the ServerNet SAN manager process, represented as a

PROCESS object) are documented in the SCF Reference Manual for the Kernel Subsystem.

Table 5-1. SANMAN SCF Commands

Command

CONN

Object

PROCESS

Object

SWITCH

Object

Sensitive

Command? See page

ALTER X Yes 5-3

DUMP X Yes 5-6

INFO X X No 5-12

LOAD X Yes 5-18

PRIMARY X Yes 5-21

RESET X Yes 5-22

STATUS X X No 5-24

VERSION X No 5-46