ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-002
5-24
STATUS CONNECTION Command
STATUS CONNECTION Command
The STATUS CONNECTION command obtains status information for the external
ServerNet fabric connections between the MSEB of the local node and the switch port.
This information is returned by the external ServerNet SAN manager process
($ZZSMN). STATUS CONNECTION is a nonsensitive command.
The STATUS CONNECTION command syntax is:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
FABRIC { X | Y } | ONLY { X | Y }
specifies that status information for only the specified fabric (X or Y) appears.
ONLY and FABRIC are synonymous in this case, and either can be used.
NNA
causes the STATUS CONNECTION command to display only the status of the
Node-Numbering Agent (NNA) registers instead of the status of the MSEB and
switch ports.
Considerations
•
Wild cards are not supported for this command.
•
The STATUS CONNECTION command displays information for both external
ServerNet fabrics unless specified otherwise.
•
As a troubleshooting aid, unfavorable status values appear in all uppercase letters.
Favorable status values appear in all lowercase letters. For example, DISABLED
is an unfavorable state, and enabled is a favorable state.
•
In addition to the values described in the STATUS command displays, you might
see values of N/A or UNKNOWN. In general, a value of N/A means that a value is
not applicable or not expected for the field. A value of UKNOWN means that a
value is expected but cannot be obtained for some reason.
STATUS [ / OUT file-spec / ] CONN[ECTION] $ZZSMN
[ , FABRIC { X | Y } | , ONLY { X | Y } ]
[ , NNA ]