ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-002
5-29
STATUS CONNECTION, NNA Command Example
In this example:
Response Status
is the general condition of the connection. For a list of possible values, see
Response Status Enumeration on page 5-48.
Rsp Status Detail
is the specific condition of the connection. For a list of possible values, see
Response Status Detail Enumeration on page 5-48.
Data Replacement
shows the contents of the NNA data replacement registers (outbound and inbound)
containing the information used to convert either a local ID to a virtual cluster ID or
a virtual cluster ID to a local ID.
Mux Control
shows the contents of the MUX control registers (outbound and inbound) that are
used to select Destination ServerNet ID (DID) replacement data or Source
ServerNet ID (SID) replacement data.
Mode Control
shows the contents of the NNA mode control registers (outbound and inbound) that
are used to select the NNA mode of operation (pass-through, clock-checking, or
conversion).
Busy Scaler
shows the contents of the NNA busy scaler registers (outbound and inbound) for
both external fabrics. The busy scaler registers contain data used to scale the busy
symbol counting mechanism.
Ready Scaler
shows the contents of the NNA ready scaler registers (outbound and inbound) for
both external fabrics. The ready scaler registers contain data used to scale the
ready symbol counting mechanism.
High Threshold
shows the contents of the NNA high threshold registers (outbound and inbound) for
both external fabrics. The high threshold registers are used to set the upper limit
for comparison to the accumulator contents.