ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-002
5-39
STATUS SWITCH, ONLY, CRU Command Example
CRU Type
is the type of CRU located in the specified slot.
CRU State
is the state of the specified CRU. Possible values are enabled, DISABLED,
ABSENT, and ERROR.
CRU Fault LED
indicates whether the fault LED for the specified CRU is on.
Transceiver n
is the type of transceiver in port n of the specified CRU.
Transceiver Enabled
indicates whether the transceiver in port n of the specified CRU is enabled.
Transceiver Status
indicates the status of the transceiver in port n of the specified CRU.
Link Alive LED
indicates whether the link-alive LED for the transceiver in port n of the specified
CRU is on.
Optical Signal
indicates whether an optical signal is present.