ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-002
6-10
SANMAN (SMN) Error Messages
SMN Error 00007
reason-text
is a text string that describes the reason the processor switch failed.
error-code
is the error code.
Cause. The subsystem could not execute the TRACE PROCESS command.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Retype the command, making sure you type it correctly.
SMN Error 00008
Cause. An unexpected error was returned from the external ServerNet SAN manager
process ($ZZSMN) during the processing of a command.
This error is often preceded by one or two lines of additional text providing more
specific information about the error. For example:
***ERROR: Invalid Parameter
***ERROR DETAIL: Bad Fabric ID Setting
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the cause of the error and then reissue the command.
SMN Error 00030
Cause. Unknown:
Effect. Unknown; SCF waits for the next command.
Cause. Contact your service provider and retain a log of a VERSION PROCESS
$ZZSMN, DETAIL command.
SMN E00007 Trace command error. reason-text. error-code
SMN E00008 Error returned from the external ServerNet SAN
manager.
SMN E00030 SANMAN SCF PM internal error at line line-num